manualshive.com logo in svg

Razor RIPSTIK RUSH, Owner'S Manual, Page: 11 / 16

Share
Download
Razor RIPSTIK RUSH Owner'S Manual Download Page 11

headline

9

Li-Ion

WARNING:

 Risk of fire - no user serviceable electric parts.

 Battery Care and Disposal

• Do not store in freezing or below freezing temperatures. To properly maintain your battery and ensure maximum 

battery life, carefully read the “Charging the Battery” section on page 6 of this owner’s manual.

• Battery pack should not be disassembled, crushed, punctured, opened or otherwise mutilated.

CONTAINS LITHIUM-ION BATTERY PACK. BATTERIES MUST BE RECYCLED.

UL 2271 COMPLIANT

Disposal:

 Your Razor RipStik Rush uses a lithium-ion battery pack which must be recycled or disposed of in 

an environmentally safe manner. Do not dispose of a battery pack in a fire. The battery pack may explode. Do not 

dispose of a battery pack in your regular household trash. The incineration, land filling or mixing of batteries with 

household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state approved lithium 

ion battery recycler.

 Charger

The charger supplied with the RipStik Rush should be regularly examined for damage to the cord, plug, enclosure and 

other parts and in the event of such damage, the product must not be charged until it has been repaired or replaced.
Use ONLY with the recommended charger.

 Wheels

Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect 

wheels for excess wear and replace hub motor as required. 

 Replacement Parts

The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the 

complete selection of replacement parts visit www.razor.com. 

 Repair Centers

For a list of authorized Razor repair centers:

• Check online at www.razor.com.
• Additional Customer Service contact information is listed on the back of this manual.

In the US and Canada only:

For more information regarding 

recycling of rechargeable batteries, 

call toll free 1-800-822-8837, or visit 

http://www.call2recycle.org

Caution:

 Do not handle damaged 

lithium-ion batteries.

Recycling Lithium-ion 

Batteries:

 Lithium-ion batteries are 

recyclable. You can help preserve 

our environment by returning your 

used rechargeable batteries to the 

collection and recycling location 

nearest you.

9

REPAIR AND MAINTENANCE

Summary of Contents for RIPSTIK RUSH

















Reviews:

No comments