background image

14

14

FCC COMPLIANCE

WARRANTY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

WARNING:

 Changes or modifications to this product not expressly approved by Razor USA LLC, could void the user’s authority to operate the equipment.

Razor Limited Warranty

The manufacturer warranties this product to be free of manufacturing 

defects for a period of 90 days from date of purchase. This Limited 

Warranty does not cover normal wear and tear, wheel, or any damage, 

failure or loss caused by improper assembly, maintenance, storage or use of 

the electric product.
This Limited Warranty will be void if the product is ever:

• used in a manner other than for recreation or transportation;
• modified in any way;
• rented.

The manufacturer is not liable for incidental or consequential loss or damage 

due directly or indirectly to the use of this product.
Razor does not offer an extended warranty. If you have purchased an 

extended warranty, it must be honored by the store at which it was 

purchased.
For your records, save your original sales receipt with this manual and write 

the serial number below.
__________________________________________

CUSTOMER SERVICE CONTACT INFORMATION

Need Help?

 Visit our website for product support, a list of authorized service centers in the US and customer service contact information at 

www.razor.com

Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is 

listed below:

AMERICAS

Razor USA LLC 

P.O. Box 3610 

Cerritos, CA 90703 

USA
+1 866 467 2967 

Monday - Friday 

8:00 AM - 5:00 PM Pacific Time 

[email protected]

EUROPE, MIDDLE EAST, AFRICA

Razor USA LLC (Europe) 

Handelsweg 2 

2742 RD Waddinxveen 

Netherlands
+44 (0) 120 267 2702 

[email protected]

ASIA

Razor USA LLC (Asia) 

P.O. Box 3610 

Cerritos, CA 90703 

USA
+81 50 7579 6622 

[email protected]

UNITED KINGDOM AND IRELAND

Razor USA LLC (UK) 

Unit 20 

Hartnoll Business Centre 

Post Hill, Tiverton 

Devon EX16 4NG 

UK
+44 (0) 120 267 2702 

[email protected]

AUSTRALIA AND NEW ZEALAND:

Razor USA LLC 

P.O. Box 4280 

Auburn South 

VIC 3122 

Australia
+1 800 954 354 (AU) 

+0 800 003 221 (NZ) 

[email protected]

IMPORTED IN JAPAN BY B-PLUS ASIA 

CORP.

Razor USA LLC 

 

Kurokawa 3-1, Asaoku, 

Kawasaki, Kanagawa  

215-0035 JAPAN
+81 (0) 44 328 9057 Tel 

+81 (0) 44 328 9067 Fax 

[email protected]

Printed in China for Razor USA LLC.

Copyright © 2003-2022 Razor USA, LLC. All rights reserved. RipStik

®

, Razor

®

 and the Razor logo design are among the registered trademarks of Razor USA LLC in the United States and/or select foreign countries. RipStik Rush

 

and the RipStik Rush logo design are trademarks of Razor USA LLC.

US_220617

Summary of Contents for RIPSTIK RUSH

















Reviews: