PRE-RIDE CHECKLIST
REPAIR AND MAINTENANCE
6
Cleaning
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners, as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness, bearings for side-to-side play, and for loose parts. When a wheel develops play, this is an indication of
excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn wheels/
bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other than
genuine Razor wheels may not be compatible with your Razor product. The use of anything other than genuine Razor
replacement parts may affect your safety and will void your warranty.
Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the
complete selection of replacement parts visit www.razor.com.
Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Additional Customer Service contact information is listed on the back of this manual.
Wheels
Periodically inspect the wheels for excess wear.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken
frames are rare, it is possible for an aggressive rider to run into
a curb or object and wreck and bend or break the frame. Get
in the habit of inspecting your child’s RipRider 360 Mini on a
regular basis.
Hardware/Loose Parts
Check and secure all fasteners before every ride. Make sure
the steering bolt and casters are tight. There should not be
any unusual rattles or sounds from loose parts or broken
components. If the unit is damaged, do not ride.
Reference
“Safety Warnings” on pages 1 and 2 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always
wear closed toe shoes (lace-up with rubber soles) and keep
shoelaces tied and out of the way of the wheels. NEVER RIDE
BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Be Careful!
This product is not for aggressive or trick riding. Avoid steep
inclines and don’t ride too fast — you can lose control and
fall. Skateboard parks are not designed for young riders. Never
ride in traffic or on the street and watch your surroundings for
pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
