3
BEFORE YOU BEGIN
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Front Fork Assembly
Front Wheel Assembly
Steering Bolt
Rear Caster Wheels
Seat
Adult assembly required. Remove contents from box. Remove the separators that protect the components from
damage during shipping. Inspect the contents of the box for scratches in the paint or dents that may have occurred
during shipping. Because the RipRider 360˚ Mini Caster Trike was partially assembled and packed at the factory
there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Allow up to 15–20 minutes for assembly.
WARNING:
: DO NOT
USE NON-RAZOR PRODUCTS
WITH YOUR RIPRIDER 360˚ MINI
CASTER TRIKE. The RipRider 360˚
Mini Caster Trike has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
your warranty.
1.
Required Tools
Two (2) 5 mm Allen Wrenches
(included)
10 mm/13 mm Wrench
(included)
Plastic Bag Contents:
• Tools
• Owner’s Manual
Product ID Locations:
(See locations to the left)
1. Frame (underneath unit)
2. Box - side of UPC (not shown)
