background image

2

SAFETY WARNINGS

Do not ride your product in wet or icy weather and never immerse in water, 

as the electrical and drive components could be damaged by water or create 

other possibly unsafe conditions. Never risk damaging surfaces, such as 

carpet or flooring, by use of a RazorX Cruiser Electric Skateboard indoors.

PROPER RIDING ATTIRE

Always wear proper protective equipment, such as an approved safety helmet 

(with chin strap securely buckled), elbow pads, kneepads and wrist guards. A 

helmet may be legally required by local law or regulation in your area. A long-

sleeved shirt, long pants, and gloves are recommended. Always wear athletic 

shoes (lace-up shoes with rubber soles) and keep shoelaces tied and out of 

the way of the wheels and motor. Never ride barefooted or in sandals.

USING THE CHARGER

The charger supplied with the product should be regularly examined for 

damage to the cord, plug, enclosure and other parts. In the event of such 

damage, the product must not be charged until the charger has been repaired 

or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from product when not in use.
Always disconnect from the charger prior to wiping down and cleaning your 

product with damp cloth.

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE 

WARNINGS FURTHER INCREASES RISK OF SERIOUS INJURY. USE 

AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS 

ATTENTION TO SAFE OPERATION. USE CAUTION.

Summary of Contents for RAZORX CRUISER

















Reviews: