background image

15

15

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that may cause undesired operation. 
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

WARNING:

 Changes or modifications to this product not expressly approved by Razor USA LLC, could void the user’s authority to operate the equipment.  

WARRANTY

Razor Limited Warranty

 

The manufacturer warranties this product to be free of manufacturing 

defects for a period of 90 days from date of purchase. This Limited Warranty 

does not cover normal wear and tear, wheel, or any damage, failure or loss 

caused by improper assembly, maintenance, storage or use of the  

RazorX Cruiser Electric Skateboard.
This Limited Warranty will be void if the product is ever: 

• used in a manner other than for recreation or transportation; 

• modified in any way; 

• rented.

The manufacturer is not liable for incidental or consequential loss or damage 

due directly or indirectly to the use of this product.
Razor does not offer an extended warranty. If you have purchased an extended 

warranty, it must be honored by the store at which it was purchased.
For your records, save your original sales receipt with this manual and write 

the serial number below.
__________________________________________

CUSTOMER SERVICE CONTACT INFORMATION

AMERICAS

Razor USA LLC

P.O. Box 3610

Cerritos, CA 90703

USA

+1 866 467 2967

Monday - Friday

8:00 AM - 5:00 PM Pacific Time

[email protected]

DISTRIBUTED IN THE UK BY:

Re:creation Limited

2 Meadows Business Park

Station Approach, Blackwater

Camberley, Surrey GU17 9AB

United Kingdom

+44 (0) 118 973 6222 

Tel

+44 (0) 118 973 6220 

Fax

[email protected]

ASIA

Razor USA LLC (Asia)

P.O. Box 3610

Cerritos, CA 90703

USA

+81 50 7579 6622

[email protected]

EUROPE, MIDDLE EAST, AFRICA

Razor USA LLC (Europe)

Handelsweg 2

2742 RD Waddinxveen

Netherlands

+44 (0) 120 267 2702

[email protected]

DISTRIBUTED IN AUSTRALIA BY:

Funtastic Limited

Level 2, Tower 2, Chadstone Place

1341 Dandenong Road

Chadstone VIC 3148

Australia

+1 800 244 543

[email protected]

Need Help?

 Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed below:

Printed in China for Razor USA LLC.

Copyright © 2003-2017 Razor USA, LLC. All rights reserved. Razor

®

 and the Razor logo design are 

among the registered trademarks of Razor USA LLC in the United States and/or select foreign 

countries. RazorX Cruiser Electric Skateboard is a trademark of Razor USA LLC.

US_170511

Summary of Contents for RAZORX CRUISER

















Reviews: