background image

10

Need Help? 

Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed at the back of this manual.

REPAIR AND MAINTENANCE

 Adjusting the Brake

 

Required Tools: 

Phillips screwdriver, 10 mm wrench

1

 To adjust the brake cable 

tension, thread the brake lever 

adjuster in or out 1/4 to 1/2 turn 

until the desired brake adjustment 

is attained. Most adjustments are 

complete at this step. If the brake 

still needs further adjustment, 

proceed to the following steps.

4

 If the brake is too tight or too 

loose, use a 10 mm wrench to 

loosen the nut on the brake cable 

for additional adjustment. Securely 

tighten the nut when finished.

2

 Using a Phillips screwdriver, 

loosen the two (2) screws on the 

foot pegs. Use an 8 mm wrench 

to hold the lock nuts that keep the 

screws in place.

5

 Replace the motor cover/

chain guard. Refer to steps 2 

and 3 above.

3

 

Using a Phillips screwdriver, 

loosen the six (6) screws to remove 

the motor cover/chain guard.

Summary of Contents for PowerRider 360

















Reviews: