5
HEADLINE
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
ASSEMBLY AND SET-UP
5
Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your
purchase.
Inflate the tires to the correct PSI before first time use.
Lower air pressure can result in a shorter ride time.
Periodically check front tire. Reinflate when needed.
1
Using a bicycle style pump
equipped for a Schrader-type valve,
inflate both tires to the PSI indicated
on the sidewall of the tire.
WARNING:
Do not use the
electric product for the first time
until you have inflated the tires to
the correct PSI. Failure to do so may
damage your motor bike and void
your warranty.
WARNING:
Do not
overinflate, as this could damage
the tire or wheel.
Note:
The pressurized air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your tires, first make sure the
pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
overinflate the tire, release the
excess pressure immediately.
