HEADLINE
44
ASSEMBLY AND SET-UP
1
Place the handlebars in the
handlebar clamps.
1
Slip the cables through the slit on
the top of the number plate. Align
the holes on the fork and snap on
the number plate.
2
Align parallel to the fork and
tighten the bolts using a 6 mm Allen
wrench. When properly tightened,
the handlebars should not move
forward or backward.
WARNING:
Failing to
properly adjust and tighten the bolts
that affix the handlebars can cause
you to lose control and crash.
1
Attach left and right number plates to the rear of the frame by using the 6
mm Allen wrench to tighten the two (2) bolts as shown above.
Attaching the Handlebars
Required Tool:
6 mm Allen Wrench (included)
Attaching the Rear Number Plates
Required Tool:
6 mm Allen Wrench (included)
Attaching the Front Number Plate
