A
B
C
D
D
C
18
Pass each shoulder strap through the inside of slot C on the MBP then back
out through slot D.
The Harness should assume a “Heart Shape” at this point with the shoulder
straps entering on the inside of the MBP and the Waist Straps exiting on the
outside.
Tighten the shoulder straps until you have a snug fit which is even on both
sides with the DSP and MBP centered along the midline of your back and
the MBP at the desired height.
Step 5: Adjusting the length of the Shoulder Straps
2 Rigging the Razor Harness 2
