Razberi V8, Core Manual And Getting Started Manual

Page: 43 / 113

A8 Overview 42
Table 29. LCD Panel Diagram
Item Button or
display
Description
1 Left Moves the cursor back in one-step increments.
2 Select Selects the menu item highlighted by the cursor.
3 Right Moves the cursor forward in one-step increments. During message scrolling:
•
Press and hold the right button to increase scrolling speed.
• Release the button to stop.
NOTE: The display stops scrolling when the button is released. After 45
seconds of inactivity, the display starts scrolling.
4 Display Displays system information, status, and error messages or iDRAC IP address.
View Home Screen
The Home screen displays user-configurable information about the system. This screen is
displayed during normal system operation when there are no status messages or errors.
When the system turns off and there are no errors, LCD enters the standby mode after five
minutes of inactivity. Press any button on the LCD to turn it on.
1.
To view the Home screen, press one of the three navigation buttons (Select, Left, or
Right).
2. To navigate to the Home screen from another menu, complete the following steps: a
Press and hold the navigation button till the up arrow is displayed.
a.
Navigate to the Home icon using the up arrow .
b. Select the Home icon.
3. On the Home screen, press the Select button to enter the main menu
Setup Menu
NOTE: When you select an option in the Setup menu, you must confirm the option
before proceeding to the next action.
Table 30. Setup Menu
Option Description
iDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected, the
available fields are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable
DNS and to view domain addresses. Two separate DNS entries are available.