Chapter 6: Post Installation Procedures
59
4.
Press the
+1
or
-1
key to change the setting from
OFF
to
YES
. The
TURN BOAT
page is then displayed.
D3451-1
5.
Keeping the boat speed below 2 knots, turn the vessel in slow
circles. It should take at least 3 minutes to complete 360°.
6.
Keep turning your boat until the unit beeps and the Deviation
screen is displayed.
This shows the maximum deviation detected, and indicates that
compass correction has been completed successfully.
Note: If the deviation value exceeds 15° or a deviation value is not
displayed at all, you should consider moving the fluxgate compass to a
better location.
133_3c06.p65
14/06/99, 10:24
59
Summary of Contents for ST6000 Plus
