6.3.9 Mode
6.3.9.1 Single
Performs 1 single measurement
Stop condition:
Stops the measurement as soon as the result is
within the selected conditions.
(Example: within ±0.10% during 10 Seconds of
time)
6.3.9.2 Continuous
Performs continuous measurement until the
measurement is stopped by the user.
Quality Assistant:
If the result is within the selected parameters, a
green light in the main screen will illuminate and
indicate this condition.
If the result is out of the selected parameters, a
red light in the main screen will illuminate and
indicate this condition.
If the selected conditions are almost met, a
yellow light in the main screen will illuminate.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Page 60 of 139
