4 Quick Start Guide
4.1 Instrument Operation – Profiles deactivated
For examples of Transformer connections see chapter 4.4 "Connection to Test Object" on page 19.
1. Power on the instrument
2. Select the Test Current:
press Range or Setup / Range
3. Press start button
4. Get the results
5. Press stop button
WARNING!
Wait until the green light shows
"Safe" before disconnecting the
cables!
4
The checkbox "Use Profiles" is not selected in the Setup under General
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Page 16 of 139