All rights reserved. No portion may be reproduced without written consent
2
RAYTECH Switzerland
Do not operate the instrument in the presence of flammable gases or
fumes.
SAFETY PRECAUTIONS!
1 – 0
The following safety precautions must be observed during all phases of
operation, service, and repair of this instrument. By purchasing this
equipment the purchaser assumes all liability for the operation and use of
this equipment. The intended use of the instrument, its design and
manufacture, is to be conducted within the precautions or other specific
warnings located within this manual. Failure to comply with these
precautions and other specific warnings violates safety standards of
design, manufacture, and intended use. Raytech Switzerland, assumes no
liability for the operation and use of this equipment.
SAFE OPERATION
Only qualified knowledgeable persons should be permitted or attempt to
operate this test equipment. All test personnel should fully familiarize
themselves with the correct application and operation of this and all test
equipment prior to operation. Persons directly, and indirectly engaged in
the operation of this test equipment should keep clear of all high voltage
apparatus while conducting tests and measurements.
BEFORE APPLYING POWER
Make sure the transformer to be tested is cleared and removed from
operation.
GROUND THE INSTRUMENT
To minimize shock hazard, the instrument chassis and cabinet must be
connected to a properly grounded receptacle. The power cord supplied
with the equipment must be connected an electrical receptacle with an
electrical ground (safety earth ground). Non-grounded instruments are
dangerous and may cause instrument damage or personal injury.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
