11.3.1 Clock
The time can be set by turning the rotary
knob and pressing the desired selection.
Selections are made in this order: Year,
Month, Day, Hour, and Minute.
Press the rotary knob while “Clock” is
highlighted.
This screen will appear.
You are now able to adjust the Year, Month,
Day, Hour, and Minute. Using the rotary
knob, turn clockwise or counter-clockwise
to change the highlighted number.
Press the rotary knob to proceed to the
next number.
11.3.2 Interval Test
The
"
Inter..."
(Interval Testing) mode will
measure and store, automatically,
numerous single sequential tests at timed
intervals that are preset by the operator.
The test set measures continuously in this
mode.Press the rotary knob while “Inter...”
is highlighted to preselect a desired
measurement setup.
You are now able to adjust the Time
Interval. Use the rotary knob, turn
clockwise or counter-clockwise to enter the
desired time.Once the desired Time is
reached, press OK with the rotary knob.
•
Ti = Time Interval of Tests
•
N = Number of tests to be performed
The minimum amount of time is 5 seconds,
maximum of 10 minutes.
The following screen will appear.
You are now able to adjust the Number of
Tests. Use the rotary knob. Once the
desired number is reached, press the
rotary knob to select “OK”.
The minimum number of tests are 2,
maximum of tests 2000.
90081-2.11 Micro Junior 2
Page 26 of 44
