7
Colour
Description
Wire Gauge (AWG)
Orange
External Input -Volt free or TTL +ve
22
Purple
External Input -Volt free or TTL GND
22
Yellow
External Output – Volt free
22
White
External Output - Volt free
22
WARNING
:
To maintain the IP rating of the product the multi-core auxiliary cable
must be waterproofed and terminated appropriately even if it is not in use.
PoE Detection – Resistance Selection Switch
There is a switch on the
VAR2-IPPoE-w8-1, i8-1
and
i8-1-C
illuminators which can
be used to change the PoE detection resistance of the illuminator (24.9K
Ω
is the
factory default setting).
Turn the power to the illuminator OFF, remove the baseplate and access the switch as
shown.
The majority of PSE equipment requires a detection resistance of 24.9K
Ω
to establish
a PoE link. Some models of PSE equipment require a 12.5K
Ω
detection resistance.
Check with your supplier of PSE equipment.
For 24.9 K
Ω
, slide switch to the LEFT (factory default – as shown). For 12.5 K
Ω
, slide
switch to the RIGHT.
Detection Resistance Selection Switch