940-M-0003
Page 4
Revision B
SPARTAN BULKHEAD 24 FLOODLIGHT STANDARD/EMERGENCY VARIANT
2.
The unit may have been supplied with an integrated photocell. Care should be taken
when positioning the unit to ensure the sensor is not shielded, is not pointing directly at
another light source and is monitoring the general, prevailing light conditions.
3.
The SPARTAN Bulkhead is supplied without the mounting brackets fitted, these can be
found in a polythene bag in the main carton and should be secured to the rear of the unit
before installation. The bolts packaged along with the unit shall be removed and used to
secure the bracket to the SPARTAN housing, the bracket can be attached to the rear via
four fixing holes, and where possible the cable glands should be kept to the bottom of
the floodlight. The unit must be aligned first before securing the bracket.
Typical wiring diagram
– standard luminaires
*Typical wiring diagram
– emergency luminaires
