Raytec Technical Support:
Europe / Middle East: +44 (0) 1670 528446
Americas: +1 (281) 438 3599
Mains
In
LED
Output
x2
Additional Information for UL 1838 & CSA 22.2 No9.0
Suitable for indoor and outdoor use.
Suitable for use in wet locations.
Suitable for mounting on flammable surfaces.
Suitable for combustrible surface use.
Suitable for ambient not exceeding 35
o
C
Do not connect PSU to an ungrounded supply.
Do not intall within 10ft of pool or spa.
Do not use with dimmers.
Do not connect two or more power supplies in parallel.
This product must be installed by a person familiar with the construction and operation of the product and
the hazards involved, in accordance with the applicable installation code.
The device is accepted as a component of a landscape lighting system where the suitability of the
combination shall be determined by CSA or local inspection authorities having jurisdiction. Such systems
should be protected by a ground fault circuit interrupter of the Class A type.
RAYMAX and RAYLUX
25 / 50 models:
LED Outputs Polarity sensitive
Telemetry Input –
requires zero volt,
latched input
Photocell
Sensitivity
Adjust
Power
Adjust
Photocell
Main Input
100V to 240 AC
