Copyright © RayTalk Industries. Tutti i diritti riservati.
48
IP Address
If you select the L2TP support on WAN interface, fill
in the IP address for it.
Subnet Mask
If you select the L2TP support on WAN interface, fill
in the subnet mask for it.
Gateway
If you select the Static L2TP support on WAN
interface, fill in the gateway for WAN interface out
going data packets.
Server IP Address
Enter the IP address of the L2TP Server.
User Name
If you select the L2TP support on WAN interface, fill
in the user name and password to login the L2TP
server.
Password
f you select the L2TP support on WAN interface, fill
in the user name and password to login the L2TP
server.
Connection Type
Select the connection type from pull-down menu.
There are
Continuous
,
Connect on Demand
and
Manual
three types to select.
Continuous
connection type means to setup the
connection through L2TP protocol whenever this
WLAN Broadband Router is powered on.
Connect on Demand
connection type means to
setup the connection through L2TP protocol
whenever you send the data packets out through the
WAN interface; there are a watchdog implemented
to close the L2TP connection while there are no data
sent out longer than the idle time set.
Manual
connection type means to setup the
connection through the L2TP protocol by clicking the
Connect
button manually, and clicking the
Disconnect
button manually.
Idle Time
If you select the
L2TP
and
Connect on Demand
connection type, fill in the idle time for
auto-disconnect function. Value can be between 1
and 1000 minutes.
MTU Size
Fill in the mtu size of MTU Size. The default value is
1460. Refer to 4.23 What is Maximum Transmission
Unit (MTU) Size?
