Copyright © RayTalk Industries. Tutti i diritti riservati.
30
Tx Rare (Mbps)
It shows the wireless link rate within WDS.
Refresh
Click to refresh the statistic counters on the screen.
Close
Click to close the current window.
3.3.9 Wireless Mesh Network Settings (only RA-M100Plus)
Mesh network uses wireless media to communicate with other APs, like the
Ethernet does. To do this, you must set these APs in the same channel with the
same Mesh ID. The APs should be under AP+MESH/MESH mode.
This feature is available on RA-M100Plus or firmware u2.3.0.3.R00.
Item
Description
Enable Mesh
Click the check box to enable Mesh connection to other
Mesh Node devices.
4.35 What is Mesh protocol?
Encryption
Select the encryption supported over wireless access. The
encryption method can be None or WPA2 (AES). Refer to
4.16 What is WPA2?
Apply Changes Click the
Apply Changes
button to register the AP to new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
Set Access
Control
If you choose 'Allowed Listed', only those mesh nodes
whose wireless MAC addresses are in the access control