Copyright © RayTalk Industries. Tutti i diritti riservati.
21
Note: RA-M100Plus and u2.3.0.3.R00 firmware
support Mesh and AP+Mesh features.
4.22 What is Universal Plug and Play (uPNP)?
Network Type
While
Mode
is selected to be
Client
. Click to select
the network type infrastructure or Ad hoc.
SSID
It is the wireless network name. The SSID can be 32
bytes long.
Channel Width
Select the operating channel width 20 MHz or 40
MHz.
[N band only]
Control Sideband
Select the Sideband with Upper or Lower for
channel width 40MHz.
[N band only]
Channel Number
Select the wireless communication channel from
pull-down menu.
Broadcast SSID
Click to enable or disable the SSID broadcast
function. Refer to 4.14 What is SSID Broadcast?
WMM Click
Enabled/Disable
d
to init WMM feature.
Data Rate
Select the transmission data rate from pull-down
menu. Data rate can be auto-select, 1M to 54Mbps
or MCS. Refer to 4.32 What is Modulation Coding
Schemes (MCS)?
Associated Clients
Click the
Show Active Clients
button to open Active
Wireless Client Table that shows the MAC address,
transmit-packet, receive-packet and
transmission-rate for each associated wireless
client.
Enable Mac Clone
(Single Ethernet
Client)
Take Laptop NIC MAC address as wireless client
MAC address.
[Client Mode only]
Enable Universal
Repeater Mode
Click to enable Universal Repeater Mode
SSID of Extended
Interface
Assign SSID when enables Universal Repeater
Mode.
Apply Changes
Click the
Apply Changes
button to complete the
new configuration setting.
Reset
Click the
Reset
button to abort change and recover
the previous configuration setting.