40
HI DELTA OUTDOOR VENT INSTRUCTIONS CONTINUED
6. Slide the collector over vent collar, aligning the holes
over the openings in the tinnerman clips as shown
in
Fig. 4
.
Fig. 4
7. Take four of the screws from the kit and screw into the
holes as shown in
Fig. 4
.
8. Slide the vent cap down into the vent collar as shown
in
Fig. 5
.
Fig. 5
9. Drill a 3/16” pilot hole into the vent cap through each
of the upper holes in the vent collar. See
Fig. 6
. Also
see finished assembly below.
Fig. 6
10. Take four of the self tapping screws from the kit and
screw into the holes as shown in
Fig. 6
. Also see
finished assembly below.
11. Turn the power on and turn gas on.
Finished assembly
Summary of Contents for 302-902
