5. Error
42 |
EN
5. Error
5.1 Error display
Operation of the Rayocomp PS 10 is very simple indeed. Still, you may accidentally press a button which
has no function for this particular part of the program. In this case, the user will receive an acoustic signal.
The Rayocomp PS 10 has three different error messages or acoustic signals:
1.
One long sound:
with this signal, the device confirms a successfully completed action, i.e. an entry
or storage.
2.
Two short sounds:
The key you are pressing has no current function.
3.
Two long sounds:
This signalises a severe error. The device will supply an error code. In the appendix
(chapter 5.2), you can look up the current error.
For example, if an error has been detected, the device might indicate the following:
If you look into the list in chapter 5.2, you will find the following information for the indicated error "Er 88"
("Er" is the abbreviation for error): you have tried to read in a memory card which has not been inserted.
Please note:
The acoustic signal can be switched on or off in the menu item "Setup".
