2. Basics of the Rayocomp PS 10
12 |
EN
2.6 Manufacturer's declaration of electromagnetic compatibility IEC
60601-1-2 for the Rayocomp PS 10
Guidelines manufacturer's declaration - Electromagnetic emissions
for the device Rayocomp PS 10
The Rayonex Rayocomp PS 10 is intended for operation in an environment as
described below. The user of the Rayocomp PS 10 must make sure that it is operated
in this type of environment.
Emissions testing
Compliance
Electromagnetic
environment – Guidelines
Radio frequency emissions
(CISPR 11)
Group 1
The Rayonex Rayocomp PS
10 only uses high-frequency
energy for its internal functions.
Thus, it emits a low level of
high-frequency energy and
interference from
electronic devices in the vicinity
of the Rayocomp is
unlikely.
HF emissions
(CISPR 11)
Class B
The Rayonex Rayocomp PS
10 is suitable for operation in
all environments, including
residential building and facilities
that are directly connected
(without the use of a power
transformer) to the same low-
voltage network as residential
buildings.
Harmonic current emissions
(IEC 61000-3-2)
Class A
Voltage fluctuations /
Flicker (IEC 61000-3-3)
Is compliant
Warning
➞
Between portable HF communication devices (radios) including their accessories
such as external antennas and the Rayocomp PS 10 together with connected
detectors, a minimum distance of 30 cm should be maintained. Non-observance can
lead to a reduction in the performance characteristics of the device.
➞ ➞
Maintain a minimum distance of 30 cm.
Warning
➞
Using this device directly next to other devices or with other devices in stacked
form should be avoided, as this could result in incorrect operation. If it is
nevertheless necessary to use it in the manner described above, this device and the
other devices should be observed to ensure that they work properly.
➞ ➞
Do not use directly next to other devices.
➞ ➞
Do not use directly next to other devices in stacked form.
