6.3.3 CHOOSING AND
SETTING ONE OF THE
FOUR LANGUAGES
FOR
DAY NAME DISPLAY
Select one of four
languages available
for the day display by
pressing and holding
button
A
.
Turn the crown (in position
2
) to display the name of
the day in either:
(
F
) French
(
E
) English
(
D
) German
(
S
) Spanish
All date settings as described in
6.3.1
to
6.3.3
are
confirmed by pushing the crown back to position
1
.
6.3.4 WEEK NUMBER
The week number display is deactivated by pressing
button
A
briefly (crown in position
1
). It will reappear
after another function is selected by turning the
crown. Repeat if necessary.
6.5
SETTING THE ALARM (DAILY ALARM)
6.5.4 TESTING THE ALARM SOUND (APPLICABLE TO
ALL ALARMS)
6.5.1 STARTING THE ALARM
When the alarm (
AL
) function is selected, the alarm
Select the alarm function (
AL
) by turning the crown
sound may be tested by pressing and holding
and pressing and holding button
A
. The letters
“ON”
button
B
. The same test may be used for
“Timer”
will appear on the dial and a “beep” will be heard.
and
“Diary”
alarms.
6.5.2 ALARM SOUND
6.5.5 SETTING THE
ALARM TIME
At the chosen
ALARM
alarm time, a
ON/OFF
The hours and minutes
first alarm will
of the alarm can be set.
sound. After
Firstly select the alarm
10 seconds,
the alarm
STRIKING
MECHANISM
TEST:
function (
AL
) by turning
the crown and then
will sound
pulling it to position
2
.
intermittently for
50 seconds and
PRESS AND
HOLD BUTTON
B
Briefly press button
B
,
then stop automatically.
thus selecting the
figures for the hours and
6.5.3 STOPPING THE ALARM
minutes
successively. Turn the
The alarm may be stopped at any moment
crown to set the hours
by pressing either of the buttons or the crown.
and then the minutes.
6.4 SETTING A SECOND
TIME ZONE (OR HOME
TIME OR SUMMER/
WINTER TIME)
In “local time” (
T1
)
display, select the
second time zone (
T2
)
function by briefly
pressing button
B
then
pulling the crown to
position
2
.
6.4.1 SELECTING THE
24 HOUR OR AM/PM
MODE
The time of the second
time zone (
T2
) may be
changed to display in
the 24 hour or
AM/PM
mode by briefly pressing
button
A
.
6.4.2 SETTING THE DIGITAL
HOURS, MINUTES
AND SECONDS
The hours and minutes
are set by turning the
crown.
Briefly press button
B
to
confirm setting of the
T2
hour, then adjust the
T2
minutes and confirm
again.
Briefly press button
B
again to set the date for the
second time zone chosen.
(refer to
6.4.3
, below).
6.4.3 DATE OF THE SECOND TIME ZONE OPTION
If you wish, you may set the date of the second time
zone with a variation of ± 1 day to local time (
T1
).
E.g.: If the date in the local time is the 25th, the date
of the second time zone is either the 24th or 26th
(maximum difference between two time zones
is one day).
Push the crown back to
position
1
after carrying
out all the adjustments.
The alarm is activated
automatically on
“ON”
if its
values have been modified
since the last setting.
“OF”
display: alarm is deac
tivated.
ALARM
ON/OFF
Refer to
6.5.1
to reactivate.
6.4.4 SETTING THE DATE
OF THE SECOND
TIME ZONE
After you have pressed
button
B
a third time
as described in
7.4
,
you may set the date
of the second time zone
by turning the crown.
Push the crown back to position
1
after adjustment.
6.6 PROGRAMMING AN ALARM (CALENDAR-ALARM)
6.6.1 SELECTING THE
CALENDAR-ALARM
FUNCTION
The calendar-alarm
function (
AG
) is selected
by briefly pressing button
B
when the alarm function (
AL
)
is displayed, by turning the
crown in position
1
. This
allows display of the calendar
alarm stored or
programming of a different alarm.
The digital display located at the bottom of the
dial alternately indicates the day, month and year
and the hours, minutes and
“ON/OF”
display.
To test the alarm sound:
press and hold button
B
.
4/6
