“Energy-saving”
mode
will be activated by
pressing and holding
button
A
until the
“BAT”
(battery)
message disappears.
To reactivate normal
operation, simply push
the crown back to
position
1
. The time which has elapsed since
the hands stopped is automatically regained.
6.2 SETTING THE TIME T1
Select the
T1 (TIME)
function by turning the
crown, then pull it to
position
2
.
6.2.1 SELECTING THE
24 HOUR OR AM/PM
MODE
The digital time (figures)
can be changed to
display in either 24 hour
or AM/PM mode by
briefly pressing button
A
.
5.
SYNCHRONISING THE HANDS AND
DIGITAL TIME
The hour shown by the hands and the digital time
should be in perfect synchronisation. Any possible
loss of synchronisation between the two (battery
change, violent impact) will require the hands to
be adjusted to match the digital time displayed.
Proceed as follows:
Select the neutral
display position by
turning the crown,
then pull it to position
2
.
The letter
“R”
will be
displayed.
Press the
B
button
briefly; the hour,
minute and second
figures are selected
and will flash succes
sively.
6.2.2 SETTING THE
DIGITAL HOURS,
MINUTES AND
SECONDS
Press button
B
briefly;
the hour, minute and
second figures are
selected and will
flash successively.
The hour, minute and second figures can
be successively adjusted by rotating the crown.
Push the crown back to position
1
after adjustment.
The hands are
successively
synchronised by
turning the crown.
NB:
The second hand
can only be adjusted
in a clockwise direction
(crown turning
upwards).
Push the crown back into position
1
when the
position of the three hands corresponds to the
digital time displayed.
This synchronisation only adjusts the time displayed by
the hands to local time (
T1
). For perfect synchronisation
between analogue time (hands) and digital time
(figures), firstly adjust the hands to the digital time
displayed (in synchronisation mode
“R”
) and then
adjust the exact time in
“Setting”
mode as shown
in the following chapter on page
58
.
6.3 SETTING
THE
DAY OF
WEEK
FULL DATE
THE WEEK
NUMBER
Select the full date
function by turning
the crown, then pull
it to position
2
.
DATE
YEAR
MONTH
6.3.1 SETTING
DAY/MONTH (D-M)
OR MONTH/DAY (M-D)
– Briefly press button
A
to select date
display mode:
Day (
D
) / Month (
M
)
or
Month (
M
) / Day (
D
).
6.
INSTRUCTION FOR USE
6.1 NEUTRAL DISPLAY, WITH OR WITHOUT DATE
Neutral display, selected by turning the crown, allows
only the hands to appear; the digital date may be
displayed or hidden.
The date display may be
activated or deactivated
in this mode by pressing
button
A
briefly.
6.3.2 SETTING THE DATE,
MONTH AND YEAR
The date (
D
), month
(
M
) and year are
changed by rotating
the crown. The day of
the week is automati
cally selected accord
ing to the date. Press
button
B
briefly to confirm date setting (
D
), then con
firm the month (
M
) and year.
3/6
