T2 SECOND TIME
Digital display of
a second time:
– another time zone,
– home time,
– summer/winter time.
WEEK NUMBER
Digital display of day,
week number (may also
be hidden), date, month
and year.
AL DAILY ALARM
Alarm time may be
programmed in hours
and minutes.
In addition to the crown, the watch has
two buttons
A
and
B
the action of
which depends on the function select
ed.
Depending on the action required,
choose either:
– brief press
or
– long press (1 to 2 seconds)
AG ANNUAL ALARM
Calendar alarm; digital
display of annual alarm,
showing the date, month,
year, alternat
ing with
the hour,
minutes
and alarm
activation.
CHR’ CHRONOGRAPH
Chronograph in hours,
minutes, seconds,
hundredths of a second
up to 24 hours and in
days, hours and minutes
over
24 hours up to 99 days.
BUTTON A:
– selects the special
functions AM/PM,
ON/OFF, START/STOP,
– date display
(Date-Month / Month-Date),
– activation or deactivation
of the week number and the date.
BUTTON B:
– selects the digits for
adjustment (H-MIN-SEC…),
– audible confirmation,
alarm sound test,
– selecting the T2 “additional
functions” and calendar alarm.
Resetting the
chronograph.
Presetting the timer.
CROWN:
– dial lighting by pressing (
0
)
the crown (position
1
),
– selecting the functions
by turning (position
1
),
– adjusting the functions
or language choice by
turning (position
2
).
TM TIMER
Timer
programmable in
days, hours, minutes and
seconds up to 99 days.
EOL BATTERY END OF
LIFE INDICATOR
This indicator shows that
the battery should be
replaced imminently (within
2 weeks). The EOL is
shown in neutral selection
by the appearance of
“EOL”
or by other functions
flashing when the crown
is in neutral position.
3. DIAL
LIGHTING
Pressing the crown (
0
)
briefly will light up the
dial for approx. 6 sec
onds in each function.
All the hands stop
momentarily. The exact
time is reset automati
cally at the end of light
ing.
2. SETTINGS
The various functions are selected by turning
the crown.There are three axial positions:
– pushed
in (Pos.
0
)
– neutral
(Pos.
1
)
– pulled
out
(Pos.
2
)
In neutral position, you can select
various functions by rotating the
crown. The crown may be turned
in both directions. In pulled-out
position, function data may be
adjusted by turning the crown.
4. ENERGY-SAVING
MODE
It is possible to set the watch to
“energy-saving”
mode if you do not intend to use it for several days.
In this mode, power consumption is reduced to
conserve energy in the battery.
Select display neutral
position by turning the
crown, then pull it out
to position
2
.
Synchronisation mode
is activated.
2/6
