12
ST7002 SmartPilot Controller Operating Guide
How do I adjust the contrast?
To set the display contrast level:
1. With the autopilot in Standby mode, press the
disp
button for one second to
access the
LAMP
screen.
2. Press the
disp
button for one second again, to display the
CONTRAST
screen.
3. Use the
up
and
down
arrow buttons to set the required contrast level (from
1
to
15
).
4. The display automatically returns to the previous mode if you do not press a
button for 10 seconds:
Note:
if you press another mode button within 10 seconds you will select the mode as-
signed to that button (for example:
auto
selects Auto mode,
standby
selects Standby
mode).
Summary of Contents for SmartPilot ST7002
