Chapter 2: Commissioning
29
1. Access the
AUTOLEARN
screen in Seatrial Calibration:
i. from Standby mode, press
standby
for 2 seconds, then
disp
twice to
see the
SEATRIAL CAL
screen
ii. then press
auto
to enter Seatrial Calibration, and
disp
4 times.
2. Prepare to start the AutoLearn:
•
sail boats:
with the sails down and under engine power, steer straight
ahead (rudder centered) and motor the boat at typical cruising speed
• if conditions are not calm, head into the wind and waves
At least 0.25 nm (500 m) of clear sea space
At least 0.04 nm (100 m)
of clear sea space
D5495-2
1 minute
(approximately)
Wind
2 sec
x2
• steer straight ahead at cruising speed
(planing boats – just on the plane)
• head into wind and waves
x4
D9330-1
AutoLearn in progress
Prepare for AutoLearn
Start
AutoLearn
Enter Seatrial calibration
CHECK!
Before proceeding, ensure
you have sufficient clear
sea space
81282_1.book Page 29 Monday, October 2, 2006 1:58 PM
All manuals and user guides at all-guides.com
all-guides.com