Raymarine RayPilot 650 User Manual Download Page 25

Page: 25 / 81

RayPilot 650 Control Unit - Owner’s Handbook

e R

ayP

ilot

2.8 Alarms and warnings

The RayPilot has a number of warning alarms that can be displayed.
An audible alarm will also sound at the same time.

Off Course alarm

The Off Course alarm sounds in Auto, Navigation (Track) and
Wind Vane modes when the current compass and the locked pilot
heading differ by more than the setting in calibration for a period of
20 seconds.

Waypoint Change alarm

The Waypoint Change alarm sounds in Navigation (Track) mode
when the target waypoint from the navigation aid changes.

The display alternates between the direction the boat will turn and the
bearing to the next waypoint in the route.

D987-1

D988-1A

81013_4.book Page 20 Wednesday, July 25, 2001 11:04 AM

Summary of Contents for RayPilot 650


















































































Search results

Summary of Contents for RayPilot 650

Reviews:

Related manuals for RayPilot 650

Brands by name

Popular brands

Raymarine RayPilot 650, User Manual

Search results

Summary of Contents for RayPilot 650

Reviews:

Related manuals for RayPilot 650

Brands by name

Popular brands