Raymarine Raynav 300 GPS Plotter, Owner'S Handbook Manual

Page: 73 / 136

Chapter 3: Operation 3-45
Figure 3-45: Name Track Soft Keys
4. To name the route press the
YES
soft key.
i. Use the trackpad left/right to select the character you wish to edit
and the trackpad top/bottom to change the character.
ii. Press
ENTER
to finish and clear the Track List.
5. To save the unnamed track, press the
NO
soft key to clear the list. The
track is saved and is listed as
TRACK NOT NAMED
.
6. Press
ENTER
to finish and clear the Track List.
7. To return to the Track soft key display, press
CLEAR
.
8. To return to the default soft key display, press
CLEAR
again.
Naming, Erasing and Showing a Track
➤
To name an existing track, erase a track or show a track:
1. Press the
TRACK LIST
soft key; the Track List is displayed.
The highlight indicates the selected track.
2. Using the trackpad top/bottom, select the required track and press the
SAVE TRACK
,
NAME TRACK
or
ERASE TRACK
soft key.
3. To
NAME
a track, use the trackpad left/right to select the character you
wish to edit and the trackpad top/bottom to change the character.
4. Press
ENTER
to finish the operation or
CLEAR
to cancel the name.
5. To
ERASE
a track you are prompted to confirm:
i. Press
NO
to cancel the operation, then
ENTER
if you wish to
remove the Track List.
ii. Press
YES
to erase the track from the Track List, then
ENTER
to
remove the Track List.
6. If you select
SHOW
a track when a current, unsaved track is displayed,
you are prompted to save the current track. Proceed as described in
Clearing the Current Track on page 3-43 or press the
NO
soft key to
cancel the operation.
The Track List is removed and the selected track is displayed.
YES NO
NAME TRACK?
D4922-1