Raymarine Raynav 300 GPS Plotter, Owner'S Handbook Manual

Page: 46 / 136

3-18 Raynav 300 GPS Plotter
3. To edit the symbol, press the
SYMBOL
soft key.
Use the soft keys, shown in Figure 3-25 , to highlight the required
symbol, then press
ENTER
to confirm the selection.
Press
CLEAR
to return to the default soft keys.
Figure 3-25: Waypoint Symbol Selection
4. To edit the waypoint name, press the
NAME
soft key.
The
NAME WAYPOINT
window is displayed.
5. Use the trackpad to enter or edit the name:
• Use the trackpad left/right to move the cursor to the character to
be changed.
• Use the trackpad top/bottom to scroll through the characters.
6. When name editing is complete, press
ENTER
to save the name and
remove the window, or
CLEAR
to cancel the operation. The waypoint
name replaces the waypoint number.
7. Press
CLEAR
to return to the default soft keys.
8. To edit the waypoint position, press the
EDIT WAYPOINT
soft key, fol-
lowed by
POSITION
.
The Waypoint Position pop-up box is displayed.
9. Use the soft keys to select
LAT
,
LON
,
BRG
or
RNG
.
Note: If no fix has been acquired, the
SET BRG
and
SET RNG
soft keys are
unavailable and grayed out.
10. Use the trackpad to edit the value:
• Use the trackpad left/right to move the cursor to the character to
be changed.
• Use the trackpad top/bottom to scroll through the characters.
• Adjust each parameter until the waypoint position is correct.
11. When position editing is complete, press
ENTER
to save the position
or
CLEAR
to cancel the operation.
The Waypoint Position window is removed from the screen and the
default soft keys are displayed.
SELECT SYMBOL
D4909_1