Innovation, Science and Economic Development Canada (ISED)
This device complies with License-exempt RSS standard(s).
Operation is subject to the following two conditions:
1.
This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Innovation, Sciences et Développement économique Canada (Français)
Cet appareil est conforme aux normes d'exemption de licence RSS.
Son fonctionnement est soumis aux deux conditions suivantes:
1.
cet appareil ne doit pas causer d'interférence, et
2. cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter
son fonctionnement.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Warning: Maximum Permissible Exposure
For optimal radio performance and minimal human exposure to Radio Frequency
(RF) electromagnetic energy, you must ensure that the antenna is:
• connected to the radio before transmitting
• located where it will be away from people
• located at least 1.8 meters (5.9 feet) from the radio’s main unit
Failure to observe these guidelines may expose those within the Maximum
Permissible Exposure (MPE) radius to RF radiation absorption that exceeds the
FCC MPE limit. It is the radio operator’s responsibility to ensure that no person
comes within this radius.
Caution: Perform regular radio checks
Perform regular radio checks when using your vessel, as recommended in radio
training and certification schemes and radio equipment rules of use.
Caution: Ensure proper radio use
Under no circumstances should a DSC distress alert be sent from your radio for
test purposes. Such action is a violation of rules of use for radio equipment, and
can result in heavy fines.
Water ingress
Water ingress disclaimer
Although the waterproof rating capacity of this product meets the stated water ingress protection
standard (refer to the product’s
Technical Specification
), water intrusion and subsequent equipment
failure may occur if the product is subjected to high-pressure washing. Raymarine will not warrant
products subjected to high-pressure washing.
Disclaimer
Raymarine does not warrant that this product is error-free or that it is compatible with products
manufactured by any person or entity other than Raymarine.
Raymarine is not responsible for damages or injuries caused by your use or inability to use the
product, by the interaction of the product with products manufactured by others, or by errors in
information utilized by the product supplied by third parties.
8