4
Ray101E Handheld VHF Radio
2.3 Attaching the Belt Clip
➤
To attach the belt clip and adapter:
1. Remove the belt clip and adapter hardware from the packing materials.
2. With the adapter button facing away from the Ray101E, slide the adapter
into the notch on the rear of the radio until it snaps into place.
3. Hold the belt clip perpendicular to the Ray101E and slide the belt clip
notch onto the adapter button until it snaps into place.
4. Rotate the belt clip so that the longer end extends above the top of the
radio.
5. Squeeze together the two top ends of the belt clip and attach to your belt
or pant waist.
➤
To remove the radio from the belt clip:
1. Rotate the radio perpendicular to the belt clip.
2. Press the release button at the top of the belt clip.
3. Pull the radio up and away from the belt clip.
2.4 Attaching the Wrist Strap
1. Using the end of a paper clip, feed the narrow end of the strap through the
two mounting holes at the top of the radio behind the antenna.
2. Continue feeding the narrow end of the strap through the loop and pull
tight.
2.5 Battery Usage
The Ray101E can be powered by the supplied six (6) Nickel Metal Hydride
(Ni-MH) batteries or with six (6) regular AA alkaline cells (not supplied),
using the supplied Battery Tray.
Battery Tray
➤
To open the Battery Tray and insert the battery cells:
1. Lift the fastener at the base of the unit and rotate counterclockwise ¼ turn
to the UNLOCK position.
2. While holding the Ray101E in one hand, use the other hand to push the
battery tray downward and then away to separate it from the back of the
radio.
