Raymarine Ray101 Owner'S Handbook Manual Download Page 37 | Manualshive

Page: 37 / 66

Raymarine Ray101 Owner'S Handbook Manual Download Page 37

Chapter 4: Operating the Radio

37

4.13 Using the Scan Modes

The RAY101 is equipped with three types of scan options: All Scan, Saved
(Memory) Scan and Priority Scan. If there are no channels in memory, the default
is All Scan.

This function automatically searches for transmissions on the channel set being
scanned. If a TX signal is received, the scan stops on the receiving channel as long
as it is present and the SCAN indicator flashes. If the signal is lost for five seconds,
the radio resumes scanning.

During the Scan Modes:
• Press the Channel UP/DOWN key to change the scan direction.

UP increments the channel while DOWN decrements it.

• Press and release

SCAN/SAVE

to terminate the SCAN mode.

•

DW/TRI

and

WX/BAND

keys do not function and sound an error beep if

pressed.

All Scan

Press and release the

SCAN/SAVE

key when no channels are stored in memory to

activate the All Scan function.

The SCAN indicator appears on the LCD during All Scan.

«
...
35
36
37
38
39
...
»

Summary of Contents for Ray101



































































Reviews:

No comments