34
Ray101 Handheld VHF Radio
•
WX / BAND.
Press and release to switch to Weather Mode. Press and hold to
switch to the other channel sets. The radio remains in Priority Mode even
though it switches frequency sets.
•
SCAN / SAVE.
Press and release to initiate Scan Mode. When you press
again, the scan halts and the radio returns to Priority Mode. Press and hold to
save CH16 into memory but remain in Priority Mode.
•
HI/LO / USER.
Press and release to reduce to low power but remain in Priority
Mode. Press and hold to enter User Mode. The radio switches to the last-used
User Mode channel but exits Priority Mode.
•
DW / TRI.
This key is not available during Priority Mode and an error tone
sounds if pressed.
4.9 Selecting the Secondary Priority Channel
The Ray101 enables you to program the
16/9
key to switch to a Secondary Priority
Channel. The default is CH 9.
If on a working channel, press and hold the
16/9
key for greater than 3 seconds to switch to the
Secondary Priority Channel at high power. The
default is CH 9.
If on primary Priority CH16, press and hold the
16/9
key for greater 3 seconds to switch to the
Secondary Priority Channel at HI power. The
default is CH 9. If already on Secondary Priority
Channel, press and release the
16/9
key to
switch to Priority Channel 16 at high power.
Reprogramming the Secondary Priority Channel
1. Switch to the Secondary Priority Channel.
2. Press and hold the
16/9
key for greater 3 seconds to switch to Reprogram
mode. An alert tone sounds and the current Secondary Priority Channel
flashes.
3. Change the channel number with the UP and DOWN arrow keys.
4. Press and release the
16/9
key to save the new Secondary Priority selection.
An alert tone sounds to indicate that the Secondary Priority has been
changed.
Note:
While reprogramming the Secondary Priority Channel, the PTT,
DW/TRI and WX/BAND keys are disabled and an error beep sounds.
