Raymarine RA1072HD, Installation Manual

Page: 34 / 48

30
WARNING:
Support the pedestal unit until it has been secured to the
mounting platform. It is important that all four sets of nuts and
washers are used to secure the pedestal to the mounting
platform.
5. Referring to the following illustration, use the four nuts and associated
washers to secure the pedestal. Grease the studs with Denso paste
(supplied). Tighten to 22.1 lb ft. (30NM) torque; ensure the radar is
tightly fitted. If required, cut-off any excess stud.
FORWARD
D10494-1
IMPORTANT
Ensure nut torques are
periodically checked.
1. Apply Denso Paste to the four studs.
2. Secure pedestal to mounting platform using the
plain washers, spring washers and nuts.
3. Tighten the nuts to 30 Nm (22.1 lb ft).
Chec
k tor
ques