Raymarine Quantum, Installation Instructions Manual

Page: 23 / 52

4.2 Connections overview
Use the following information to help you identify the
connections on your product.
Connector Connects to: Suitable cables
RayNet network
or device. Not
required if
connecting using
Wi-Fi. Refer to the
Chapter 10 Spares
and accessories
section.
12 V / 24 V power
supply. Supplied with your
product.
The power and data connections are located on
the underside of the scanner unit, as shown in the
following illustration.
D13452-1
12 / 24 V
RayNet
Typical cable routing scenarios
There are 4 typical cable routing scenarios.
Note: The routing options described and illustrated
in this section assume that a physical data
connection is used between your Radar scanner
and multifunction display (MFD). However, if the
scanner is connected to your MFD via Wi-Fi, a
physical RayNet connection is not required.
1. Cable routing for a scanner mounted on a
platform, using separate cables for the power
and data connection.
2. Cable routing for a scanner mounted on a
platform, using the combined power and data
cable from an existing Raymarine Digital Radar
scanner installation. For this, the
A80308
Y-adapter accessory is required (not supplied
with the scanner).
3. Cable routing for a scanner mounted on a pole,
using separate cables for the power and data
connection.
4. Cable routing for a scanner mounted on a pole,
using the combined power and data cable from
an existing Raymarine Digital Radar scanner
installation. For this, the
A80308 Y-adapter
accessory is required (not supplied with the
scanner).
Cable routing — platform mount
There are 2 typical cable routing scenarios for
platform mount installations.
• Using separate power and data cables.
• Using an existing combined power / data cable
from an older Raymarine Digital radar scanner. In
this scenario, the
A80308 Y-adapter accessory is
required (not supplied with the scanner).
Using separate power and data cables
Note: The routing options described and illustrated
in this section assume that a physical data
connection is used between your Radar scanner
and multifunction display (MFD). However, if the
scanner is connected to your MFD via Wi-Fi, a
physical RayNet connection is not required.
The following drawing illustrates the cable routing for
a scanner mounted on a platform, using separate
cables for the power and data connections.
D13454-1
2
12 / 24 V
1
RayNet
1. RayNet data connection.
2. 12 V / 24 V power connection.
Note:
• A separate power cable is supplied with all
Quantum™ Radar variants.
• Not all Quantum™ radar variants are supplied
with a RayNet cable. Refer to the Chapter 2
Document and product information section for
more information.
• Refer to the 10.4 RayNet to RayNet cables and
connectors section for information on suitable
accessory RayNet cables.
Cables and connections 23