Raymarine P70, Installation And Operation Instructions Manual

Page: 17 / 104

3.6 Tools
Tools required for installation
1 2
3 4
5
6 7
D12055-1
1. Power drill
2. Jig saw
3. Screwdriver
4. Suitable size (10 mm to 30 mm)
hole cutter
5. File
6. Adhesive tape
7. Drill bit of appropriate size*
Note: *Drill bit size is dependent on the thickness and type of
material that the unit is to be mounted on.
3.7 Typical systems
Note: The information below is provided as examples of how
to connect your unit to compatible autopilot systems. For
detailed information on setting up an autopilot system please
refer to the installation instructions that accompanied your
system.
Example — Evolution system (SeaTalk ng )
S e a Talk
ng
S
ea
Ta
lk
ng
12 V
0
12 V
3
5
S eaTalk
ng
SeaTalk
ng
2
1
7 6
8
D12877-1
4
9
1. Power supply for SeaTalk ng .
2. Evolution autopilot (EV-1 shown).
3. p70 / p70R pilot controller (p70R shown).
4. SeaTalk ng backbone.
5. SeaTalk ng 5–way connector.
6. Drive unit.
7. Rudder reference unit.
8. Power supply for ACU.
9. ACU (ACU-100 shown).
Note: The ACU-100 does not provide power to SeaTalk ng . A
separate 12 V power supply is required.
Example — SmartPilot SPX system (SeaTalk ng )
S e a Talk
ng
S
ea
Ta
lk
ng
12 V
S eaTalk
ng
S MART PILOT
7 6
3
D13029-1
4
5
2 1
1. p70 / p70R pilot controller (p70R shown).
2. GPS Receiver.
3. 12 V dc power supply to SPX, also supplying power to
SeaTalk
ng .
Planning the installation
17