Raymarine P70, Installation And Operation Instructions Manual

Page: 74 / 104

12.1 Set up menu
The set up menu provides a range of tools and settings to
configure the pilot controller.
Menu item Description Options
Auto Pilot calibration Pilot commissioning /
calibration settings SeaTalk ng
• Vessel settings.
• Drive settings.
• Sailboat settings.
• Commissioning.
SeaTalk
• User settings.
• Dealer settings.
• Seatrial calibration.
User preferences Set user preferences
such as: Time & Date,
Units of measurement,
Language, Vessel
type, Vessel details,
and Variation. User preferences
menu.
System set up Set system grouping,
display and system
color and brightness,
Multiple data sources
and about system set
up. System set up menu.
Simulator Enables or disables
simulator mode,
which allows you to
practice operating your
instrument display
without any data from
any other external unit. • On
• Off
Factory reset Delete user settings
and Restore unit to
factory default settings. • Yes
• No
Diagnostics Information About the
display and system
and key beep on / off
setting.
• Yes
• No
12.2 Autopilot calibration menu
The Autopilot Calibration menu options are determined by the
connected autopilot system.
Note: Not all options are available when Calibration Lock
is turned On.
Note:
• *SPX and SeaTalk SmartPilots only.
• **Evolution autopilots only.
Menu Options
Vessel Settings • Vessel Hull Type
• Drive Type
• *Cruise Speed
• Compass Offset
• *Latitude Compass Damping
• Calibration Lock
Drive Settings • *Rudder Gain
• *Response Level
• *Counter Rudder
• Rudder Damping
• *Auto Trim
• Auto Turn
• **Power Steer
• Reverse Rudder Ref.
• *Off Course Alarm
• *Turn Rate Limit
• Motor Phasing
• Rudder Limit
• **Rudder Offset
• Hard Over Time
Commissioning • Dockside Wizard
• *Sea Trial Wizard
• *Motor Phasing
• *Swing Compass
• *Auto Learn
• Align Compass GPS
• *Align Compass
• Pilot Factory Reset
• **Restart Compass
• **Compass Lock
• **Debug Level
74
p70 / p70R