Raymarine i40, Installation And Operation Instructions Manual, Page: 25 / 68

5.5 Front bezel
Removing the front bezel
Note: You do not need to remove the front bezel when mounting
the unit.
1
2
3
4
D12363-1
1. Remove the unit from the mounting surface or mounting bracket
and disconnect the cables.
2. Using your fingers pull the bezel up and away from the unit at
the top corner, nearest the buttons, as shown in 1.
The bezel will start to come away from the unit at the top corner.
3. Using your fingers pull the bezel up and away from the unit at
the bottom corner, nearest the buttons, as shown in 2.
4. Pull the unit away from the bezel and slide unit away from lugs
on opposite side of the bezel, as shown in 3 and 4.
The bezel will now come free from the unit.
Important: Use care when removing the bezel. Do not use any
tools to lever the bezel, doing so may cause damage.
Fitting the front bezel
2
1
D12364-1
1. Ensure the keymat is positioned correctly.
2. Fit the unit into the bezel so that the unit slides under the lugs
on the bezel, as shown in 1.
3. Gently but firmly press the bezel onto the unit until it clicks into
place, as shown in 2.
4. Follow the mounting instructions to refit the unit on to the
mounting surface.
Location and mounting
25