Note:
When using third party transducers only the 200 kHz channel will be available.
Compatible legacy transducers
DownVision™ transducers
The following DownVision™ transducers can be connected to Element™ HV displays using the CPT-S
/ DownVision 9–pin adaptor cable (A80559):
Part number
Description
A80507
CPT-90 DVS
— DownVision™, Transom mount, Plastic transducer.
A80351
CPT-100 DVS
— DownVision™, Transom mount, Plastic transducer.
Replaced A80270.
A80277
CPT-110
— DownVision™, Thru-hull, Plastic transducer with fairing block.
A80350
CPT-120
— DownVision™, Thru-hull, Bronze transducer with fairing block.
Replaced A80271.
Dragonfly® transducers
The following Dragonfly® transducers can be connected to Element™ HV displays using the Dragonfly
10–pin adaptor cable (A80558):
Part number
Description
R70374
CPT-DVS
— DownVision™, Transom mount, Plastic transducer.
A80278
CPT-70
— DownVision™, Thru-hull, Plastic transducer with fairing block.
A80349
CPT-80
— DownVision™, Thru-hull, Bronze transducer with fairing block.
High CHIRP sonar transducers
The following conical beam, high CHIRP sonar transducers can be connected to Element™ HV
displays using the CPT-S/DownVision 9–pin adaptor cable (A80559):
Part number
Description
E70342
CPT-S
High CHIRP, Transom mount, Plastic transducer.
E70339
CPT-S
High CHIRP, 0° angled element, Flush mount, Thru-hull, Plastic
transducer.
A80448
CPT-S
High CHIRP, 12° angled element, Flush mount, Thru-hull, Plastic
transducer.
A80447
CPT-S
High CHIRP, 20° angled element, Flush mount, Thru-hull, Plastic
transducer.
A80446
CPT-S
High CHIRP, 0° angled element, Flush mount, Thru-hull, Bronze
transducer.
E70340
CPT-S
High CHIRP, 12° angled element, Flush mount, Thru-hull, Bronze
transducer.
E70341
CPT-S
High CHIRP, 20° angled element, Flush mount, Thru-hull, Bronze
transducer.
Legacy transducer extension cables
When connecting a compatible legacy transducer to an Element display, using an adaptor cable:
if the cable run requires extending, you must use an extension cable which is compatible with
your transducer.
Important:
The HyperVision™ extension cable cannot be used to extend the cable run of legacy transducers.
18
