Raymarine CYCLONE, Installation Instructions Manual

Page: 47 / 92

10. Lift the pedestal up and connect the power and data cables to the connectors on the underside
of the pedestal. Organise the cables in accordance with your planned cable routing and place the
pedestal back into position.
Important:
For more information refer to p.37 — Cables and connections
Important:
Ensure the cables are NOT powered during the installation procedure.
11. Grease the 4 metal studs with Denso paste.
12. Referring to the following illustration, use the 4 nuts and associated washers to secure the
pedestal to the platform. Tighten each nut to 30 Nm (22.1 lb ft).
Installation 47