Raymarine C120, Installation Manual

Page: 42 / 54

36 C-Series Displays Installation Manual
GPS
Check that the GPS has a clear view of the sky and is not obstructed e.g. by buildings,
bridges or other equipment fitted on-board.
Other equipment
For details of pre-start checks for other equipment e.g. AIS and Navtex receivers,
please refer to the relevant handbook.
4.3 Initial power on procedure
Once you have conducted the pre-start checks you are ready to start the display:
1. Press the
POWER
button until the introductory logo is displayed:
• The keys light up and after a few seconds a navigation warning is displayed.
• At this time the radar scanner (if fitted and powered) is checked for compatibil-
ity with the display. An error message is displayed if the scanner is incompati-
ble.
2. Read the warning and then press
OK
to remove it. The Select Page Set screen is dis-
played:
3. Use the trackpad to select the required page set and then press OK .
You are now ready to test that your system is receiving the necessary data to run all the
required applications.
D6577-1
D6655-3
87020-3.book Page 36 Tuesday, March 7, 2006 11:02 AM