52
Wheel & Tiller Autopilots: Owner’s Handbook
5
Install
ing
the
•
As standard, we supply a 1 m (3 ft 3 in) power cable terminated
with
1
/
4
inch spade connectors.
•
You can extend the power cable if required. The following table
shows the minimum acceptable cable sizes:
Note: If you need to extend the cable, you MUST use the correct cable
size.A lighter gauge cable might cause a voltage drop between the
supply and the control unit. This will reduce the power to the drive,
causing slower response to course changes and corrections.
SeaTalk connections
You will not need any SeaTalk cables to install the standard
autopilot system.
However, if you want to connect your control unit to other
SeaTalk equipment, you will need to purchase the necessary cables
from your Raymarine dealer.
The following illustration shows the range of available SeaTalk
cables.
Cable length
Copper area
AWG
Up to 2.5 m (8 ft)
1.0 mm
2
18
Up to 4.0 m (13 ft)
1.5 mm
2
16
Up to 6.0 m (19.5 ft)
2.5 mm
2
14
Flat moulded plug to round plug
Flat moulded plugs at each end
D5417-1
Part no.
Type
Length
D187
Flat moulded plug to male round plug
0.15 m (6 in)
D188
Flat moulded plug to female round plug
0.3 m (12 in)
Part no.
Type
Length
D284
Flat moulded plugs at each end
1 m (3 ft 3 in)
D285
Flat moulded plugs at each end
3 m (9 ft 10 in)
D286
Flat moulded plugs at each end
5 m (16 ft 5 in)
D287
Flat moulded plugs at each end
9 m (29 ft 6 in)
D288
Flat moulded plugs at each end
20 m (65 ft 6 in)
Summary of Contents for autopilot ST4000+
