Raymarine Autohelm ST30 Bidata, Owner'S Handbook Manual

Page: 26 / 38

16 ST30 Round Bidata Owner’s Handbook
bidata
depth speed
depth
speed
CAL
2 sec
DEPTH UNITS
OFFSET
LOG CALIBRATION
LOG UNITS
d
d
d
d
D5040-2
If CAL OFF is displayed, press depth or speed to return to normal
operation then use the Extended calibration procedure to turn on basic
calibration.
Offset entry
This option is used to select whether the displayed water depth is from
the surface or below the Biducer.
• Set a 0 (zero) offset, to give the depth from the transducer to the
seabed.
• Set a negative offset, to give the depth from the keel to the seabed.
• Set a positive offset, to give the depth from the waterline to the
seabed.
1. At the OFFSET display, press
depth
and
speed
together
momentarily to enter edit mode.
075_4c04.p65 11/04/01, 11:27 16