Raymarine AR200, Installation Instructions Manual

Page: 37 / 74

1. Positive (+) bar
2. Negative (-) bar
3. Circuit breaker
4. Waterproof fuse holder with 5 A inline fuse must be fitted (not supplied).
Important:
Observe the recommended fuse / breaker ratings provided in the product’s documentation,
however be aware that the suitable fuse / breaker rating is dependent on the number of devices
being connected.
Implementation — direct connection to battery
• SeaTalkng ®Where connection to a power distribution panel is not possible, the power cable may
be connected to the vessel's battery..
• You MUST fit a suitably rated fuse or breaker between the red wire and the battery’s positive
terminal.
• Refer to the inline fuse ratings provided in the product’s documentation.
• If you need to extend the length of the power cable, ensure you use suitably rated cable and that
sufficient power (12 V dc) is available at the SeaTalkng ® backbone’s power connection.