Raymarine a125, Mounting And Getting Started

Page: 4 / 20

Warning: Touchscreen display
Exposure to prolonged rain may cause
erroneous touch performance, in these
situations keep touch activity to a minimum
and wipe the screen with a dry non-abrasive
cloth before using the touchscreen.
Caution: Transducer cable
• Do NOT cut, shorten, or splice the
transducer cable.
• Do NOT remove the connector.
If the cable is cut, it cannot be repaired.
Cutting the cable will also void the warranty.
Caution: Power supply
protection
When installing this product ensure the
power source is adequately protected by
means of a suitably-rated fuse or automatic
circuit breaker.
Caution: Care of chart and
memory cards
To avoid irreparable damage to and / or
loss of data from chart and memory cards:
• DO NOT save data or files to a card
containing cartography as the charts
may be overwritten.
• Ensure that chart and memory cards are
fitted the correct way around. DO NOT
try to force a card into position.
• DO NOT use a metallic instrument such
as a screwdriver or pliers to insert or
remove a chart or memory card.
Caution: Ensure card reader
door is securely closed
To prevent water ingress and consequent
damage to the product, ensure that the
card reader door is firmly closed.
Caution: Cleaning
When cleaning this product:
• Do NOT wipe the display screen with
a dry cloth, as this could scratch the
screen coating.
• Do NOT use abrasive, or acid or
ammonia based products.
• Do NOT use a jet wash.
TFT Displays
The colors of the display may seem to vary when
viewed against a colored background or in colored light.
This is a perfectly normal effect that can be seen with
all color Thin Film Transistor (TFT) displays.
Water ingress
Water ingress disclaimer
Although the waterproof rating capacity of this
product meets the stated IPX standard (refer to the
product’s
Technical Specification ), water intrusion and
subsequent equipment failure may occur if the product
is subjected to commercial high-pressure washing.
Raymarine will not warrant products subjected to
high-pressure washing.
Disclaimers
This product (including the electronic charts) is intended
to be used only as an aid to navigation. It is designed to
facilitate use of official government charts, not replace
them. Only official government charts and notices to
mariners contain all the current information needed
for safe navigation, and the captain is responsible for
their prudent use. It is the user’s responsibility to use
official government charts, notices to mariners, caution
and proper navigational skill when operating this or
any other Raymarine product. This product supports
electronic charts provided by third party data suppliers
which may be embedded or stored on memory card.
Use of such charts is subject to the supplier’s End-User
Licence Agreement included in the documentation
for this product or supplied with the memory card (as
applicable).
Raymarine does not warrant that this product is
error-free or that it is compatible with products
manufactured by any person or entity other than
Raymarine.
This product uses digital chart data, and electronic
information from the Global Positioning System (GPS)
which may contain errors. Raymarine does not warrant
the accuracy of such information and you are advised
that errors in such information may cause the product to
malfunction. Raymarine is not responsible for damages
or injuries caused by your use or inability to use the
product, by the interaction of the product with products
manufactured by others, or by errors in chart data or
information utilized by the product and supplied by third
parties.
EMC installation guidelines
Raymarine equipment and accessories conform to
the appropriate Electromagnetic Compatibility (EMC)
regulations, to minimize electromagnetic interference
between equipment and minimize the effect such
interference could have on the performance of your
system
Correct installation is required to ensure that EMC
performance is not compromised.
Note: In areas of extreme EMC interference,
some slight interference may be noticed on the
product. Where this occurs the product and the
source of the interference should be separated by
a greater distance.
For optimum EMC performance we recommend that
wherever possible:
• Raymarine equipment and cables connected to it are:
– At least 1 m (3 ft) from any equipment transmitting
or cables carrying radio signals e.g. VHF radios,
cables and antennas. In the case of SSB radios,
the distance should be increased to 7 ft (2 m).
4 a9x / a12x