0049-0867-01X 2
nd
Generation MIU14.4L – USER’S GUIDE 6/22/2011
Rev. A
Page 31 of 39
&T8 LOCAL LOOPBACK WITH SELF TEST (See Figure 6)
The modem should be on hook. Enter AT&T8 to configure the modem for analog loopback and
self test. The test timer is started at the time indicated by S18, DSR is turned off (if &S1 is in
effect). A self test condition is entered, and an OK result code is sent to the DTE. During the test
the modem sends a test message and counts errors in the looped back signal. The test is
terminated when the timer times out (S18) or the &T0, H0, or Z command is issued. When the
test is terminated, the three digit error count is sent to the DTE. An OK result code follows the
error count.
RESULT CODE
DESCRIPTION
OK
If a test state is entered.
OK
After error count is sent to DTE
ERROR
If any other V.54 test is active (&T1, &T3, &T6, &T7), or if on-line.
Summary of Contents for Telenetics MIU14.4L
